Hippel Posted April 13 Share Posted April 13 Hi all, I read somewhere recently but didn't take a lot of notice, that there was a conventional 08 at Tinsley that had the necessary modifications and equipment to deputise for a master unit of a class 13. Does anybody here know if that was correct, and do we know what the identity of the 08 in question was, please? Thanks Paul Link to post Share on other sites More sharing options...
RMweb Premium Jeremy Cumberland Posted April 13 RMweb Premium Share Posted April 13 It doesn't sound likely. They had a whole spare class 13 (only two were needed at the same time), and they could always have worked a pair of 08s in tandem. Link to post Share on other sites More sharing options...
Lemmy282 Posted April 13 Share Posted April 13 I did a lot of research into class 13's years ago when I was making up models for a local model shop and never came across this. Link to post Share on other sites More sharing options...
dave75 Posted April 13 Share Posted April 13 I think a couple of 08s had the radio equipment as fitted to the 13s so they could talk to the tower. There was an article somewhere that had the call signs , the tower was 'tinrail control' I'm sure. Link to post Share on other sites More sharing options...
RMweb Premium csvt2004 Posted April 14 RMweb Premium Share Posted April 14 In the Strathwood book "Shunters 2", there is a picture on page 54 of D3707. The caption states "it was specially modified with radio and multiple working capability to act as a replacement within one half of a class 13" 1 1 2 Link to post Share on other sites More sharing options...
Hippel Posted April 14 Author Share Posted April 14 20 minutes ago, csvt2004 said: In the Strathwood book "Shunters 2", there is a picture on page 54 of D3707. The caption states "it was specially modified with radio and multiple working capability to act as a replacement within one half of a class 13" Jeepers, this is embarrassing, as I've got that book somewhere! Perhaps this will motivate me to tidy our spare room to find it! Thanks Paul 1 1 Link to post Share on other sites More sharing options...
Hippel Posted April 14 Author Share Posted April 14 @Jeremy Cumberland, @Lemmy282, @dave75 Thanks for your responses guys, but it seems I had the answer all along, as pointed out by @csvt2004! Thanks Paul Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted April 14 RMweb Gold Share Posted April 14 There were also portable sets. Mike. Link to post Share on other sites More sharing options...
Wickham Green too Posted April 14 Share Posted April 14 2 hours ago, csvt2004 said: ... "it was specially modified with radio and multiple working capability to act as a replacement within one half of a class 13" Rather implies that it could substitute for either the Master OR the Slave .......... sounds unlikely !!?! 1 Link to post Share on other sites More sharing options...
dave75 Posted April 14 Share Posted April 14 @Enterprisingwestern what is a portable set in term of this discussion. BR database shows the radio equipment was removed from this loco in the early seventies, I wonder what the thinking was behind that. Did these locos also have a more precise Speedo so the correct speed could be maintained easier? Link to post Share on other sites More sharing options...
RMweb Gold russ p Posted April 14 RMweb Gold Share Posted April 14 I'd heard of this but didn't know its identity. I know the slave unit has an air controlled throttle but not sure if the master unit had one. If it did would make driving that 08 quite different to a normal one Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted April 14 RMweb Gold Share Posted April 14 1 hour ago, dave75 said: @Enterprisingwestern what is a portable set in term of this discussion. BR database shows the radio equipment was removed from this loco in the early seventies, I wonder what the thinking was behind that. Did these locos also have a more precise Speedo so the correct speed could be maintained easier? As to it's exact set up, I don't know, but I reckon it was used on occasions like one night when the incoming Brush 4 humped it's own train direct from the reception sidings, although it didn't go over the hump when finished. Mike. Link to post Share on other sites More sharing options...
RMweb Premium keefer Posted April 14 RMweb Premium Share Posted April 14 (edited) The MU connections between Master and Slave locos looked similar to 'Blue Star' equipment. 27-way control jumper and (white cocks) Regulating Air pipe. http://www.nigeltout.com/138_31A_Tinsley_19740806.jpg Edited April 14 by keefer 1 Link to post Share on other sites More sharing options...
dave75 Posted April 14 Share Posted April 14 59 minutes ago, Enterprisingwestern said: As to it's exact set up, I don't know, but I reckon it was used on occasions like one night when the incoming Brush 4 humped it's own train direct from the reception sidings, although it didn't go over the hump when finished. Mike. In the one of the tinsley book , the author mentioned slow speed fitted 47s standing in if a 13 wasn't available. Link to post Share on other sites More sharing options...
Michael Hodgson Posted April 14 Share Posted April 14 2 hours ago, Enterprisingwestern said: As to it's exact set up, I don't know, but I reckon it was used on occasions like one night when the incoming Brush 4 humped it's own train direct from the reception sidings, although it didn't go over the hump when finished. Mike. I don't know how much vertical play there is the bogie pivots - would it even be allowed over the hump? It is my understanding that the 08s converted to 13s were increased in weight - would that also apply to this radio-fitted standby 08? I assume the radio was necessary only if it was covering for a master unit, I don't see a use for one on the slave. You might not need it to be coupled to a slave - an 08 should still be able to do the job on it own but with shorter trains. Link to post Share on other sites More sharing options...
Covkid Posted April 14 Share Posted April 14 Don't know much about the Tinsley class 13s except to repeat what was mentioned earlier - three locos for two jobs. There would inevitably be a few occasions where there were shortfalls, but it would depends how resourceful the Ops staff were to deal with the problem. Perhaps a single conventional 08 could cover some of the work, particularly empty wagons etc. An SSC fitted diesel could be used but not over "Humpex" humps, which might affect it's usefulness. At Bescot our Target 1 was the down hump shunting loco and it was radio fitted - that was a two way radio to the panel operator in the down tower. The radio was able to be swapped for when the loco needed a major exam but mostly stayed on it's role. At Bescot our down hump was originally "humpex" so we didn't put big engines over it, and used the engine release line to transfer traffic to the north end of the yard. 1 Link to post Share on other sites More sharing options...
RMweb Premium keefer Posted April 14 RMweb Premium Share Posted April 14 I'm sure I've read somewhere (General or Sectional Appendix) that even where locos could go over the hump, cl.40/44/45/46 were still excluded (due to their long bogies). As mentioned earlier, each hump yard probably had its own particular Instructions in addition to general procedures. 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted April 14 Share Posted April 14 44 minutes ago, Michael Hodgson said: ... It is my understanding that the 08s converted to 13s were increased in weight ... Yes - look at any photo of a 13 and you'll see a humungous slab of steel rather than the standard buffer beam. 1 Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted April 15 RMweb Gold Share Posted April 15 The Class 13's were specially weighted and from what I read, they were one of the heaviest diesel loco (or loco's) on BR at 120 tons. Link to post Share on other sites More sharing options...
RMweb Gold Bri.dolan Posted April 15 RMweb Gold Share Posted April 15 Hopefully not going off topic too much ,in regards to other locos shunting the hump at tinsley here’s one of my late uncles photos Brian 13 Link to post Share on other sites More sharing options...
woodenhead Posted April 15 Share Posted April 15 @Bri.dolan Ahh from the days when much of Tinsley was surrounded by fields with horses on them. I can remember the field directly above the shed we'd sneak onto to see what was in that couldn't be seen from the other side. There were always horses there that would worry me. 3 Link to post Share on other sites More sharing options...
RMweb Premium kevinlms Posted April 15 RMweb Premium Share Posted April 15 2 hours ago, TravisM said: The Class 13's were specially weighted and from what I read, they were one of the heaviest diesel loco (or loco's) on BR at 120 tons. You mean not counting the 400 or so Peaks/Class 40s at or over 133 Tons each? Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted April 15 RMweb Gold Share Posted April 15 14 minutes ago, kevinlms said: You mean not counting the 400 or so Peaks/Class 40s at or over 133 Tons each? That’s why I said ‘one of the heaviest’, not the heaviest Link to post Share on other sites More sharing options...
Titan Posted April 15 Share Posted April 15 (edited) 38 minutes ago, TravisM said: That’s why I said ‘one of the heaviest’, not the heaviest By using that logic you could also call it one of the lightest. Class 56, 58 and 60 are also heavier. I don't think the class 13 even makes the top 5, so including it as 'one of the heaviest' is misleading. Edited April 15 by Titan Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted April 15 RMweb Gold Share Posted April 15 17 minutes ago, Titan said: By using that logic you could also call it one of the lightest. Class 56, 58 and 60 are also heavier. I don't think the class 13 even makes the top 5, so including it as 'one of the heaviest' is misleading. I think your just nit picking as the Class 56, 58 & 60's were built AFTER the Class 13's were converted. I think you need to read the post in the context it was written! Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now