coachmann Posted August 26, 2011 Share Posted August 26, 2011 Bravo! I likie the look of this coach. Very unusual and an excuse for something just that bit different. Sorry to read of your camera mishap. Mine has been taped together for years after it was first smacked against a drystone wall in Saddleworth and then dropped at the same location while photing trains! It gives the occasional ERR (error) message which mean it isnt transferring a photo to the memory card......quite dissarming when photing a steam train. Link to post Share on other sites More sharing options...
mozzer models Posted August 29, 2011 Author Share Posted August 29, 2011 Today i have made a start on class 121/122 dmu the kits is by Four Track Models until i was asked to build this i had never heard of them the kit is just the body with brass roof & white metal ends the body sits on a Lima chassie looking at the way the roof needs to be fited i may end up using the roof from the doner 2 car lima DMU cut to size heres some pics of work so far 1st pic One side folded & tacked 001 by Mozzer models, on Flickr 2nd pic both solded & one fitted with its hand rails 002 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted August 29, 2011 Author Share Posted August 29, 2011 well the body is built apart from end details the roof is To Short & To wide so i have made astart on the lima roof & once it is glued in i will need to give it a quick clean up photo update later Link to post Share on other sites More sharing options...
mozzer models Posted August 29, 2011 Author Share Posted August 29, 2011 heres the photos at the end of the day 005 by Mozzer models, on Flickr 006 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted September 4, 2011 Author Share Posted September 4, 2011 This coming week i am building a D&S GNR foot bridge Link to post Share on other sites More sharing options...
mozzer models Posted September 6, 2011 Author Share Posted September 6, 2011 well today i got the class 122 DMU finished today i am glad to see the back of this model 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr yestoday i made a start on a D&S kits GNR foot bridge but changed to have 3 sets of steps yestoday i was cutting out the steps & folding them & today made a start solding the parts togetter i have got one set of steps built apart from the castings 003 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr 2 Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted September 6, 2011 RMweb Gold Share Posted September 6, 2011 Brian that looks absolutely fantastic, I'm so glad it's you doing it and not me! As you are doing the bridge I had better get on with ballasting..........or maybe not. Link to post Share on other sites More sharing options...
mozzer models Posted September 7, 2011 Author Share Posted September 7, 2011 so far today i have built up 4 fance brackets that go on the landing each made up of 4 bits of brass & atached then to the landing it was fiddely but will mak the finished bridge look nice of to fit the handrail to the step i built yetoday plus the lip under the steps then lunch Link to post Share on other sites More sharing options...
mozzer models Posted September 7, 2011 Author Share Posted September 7, 2011 well got the detail brass parts fitted was well as fitting the handrailtops & the lip along the bottom of the steps i all so got the 2nd set of steps to the same state 001 by Mozzer models, on Flickr & here is a pic of the Landing with the brass brackits fitted 002 by Mozzer models, on Flickr depending how far i get with this foot bridge & you would like to have a look at it i will have it with me at this weekends EM North show Link to post Share on other sites More sharing options...
mozzer models Posted September 8, 2011 Author Share Posted September 8, 2011 (edited) As well as building the 2nd landing of the GNR footbridge Today i have finshed a 247 Developments kit of a GWR Dia L23 4mm OO BR-ex-GWR Dia L23 TPO fitted with nets & put down apparatus on both sides built 1933 to lot 1503 finished in BR Crimson livery & No W814W built from the 247 Developments kit 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr Edited September 8, 2011 by mozzer models 1 Link to post Share on other sites More sharing options...
mozzer models Posted September 14, 2011 Author Share Posted September 14, 2011 Well not done any work untill today as i was getting over a weekend Playing trains at EM North but i have today built up the 3rd landing & made a start on the bridges i got built one side put then i had to nip ou & that took langer that i wanted 001 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
mozzer models Posted September 15, 2011 Author Share Posted September 15, 2011 well got on well today built up the 2 link spans & attached to the landings this is now 15 1/2 inch or 395mm After tea i am making a jig to hold the legs in place for soldering to the brass work this will also br used to help hold it safe for shipping I also hope to get the steps ftiied as well legs 001 by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted September 15, 2011 RMweb Gold Share Posted September 15, 2011 I recognise that plan. It's looking really good Brian, no doubt better than the road bridges I have been building ! Link to post Share on other sites More sharing options...
mozzer models Posted September 15, 2011 Author Share Posted September 15, 2011 Itis now finished apart from painting but i will only be giving it a coat of primmer here some photos of it before it gets primmed tomorrow 002 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr 005 by Mozzer models, on Flickr 006 by Mozzer models, on Flickr 007 by Mozzer models, on Flickr 3 Link to post Share on other sites More sharing options...
Steve K Posted September 15, 2011 Share Posted September 15, 2011 Fantastic bridge. Your work has really brought out the fine details - it's a miniature work of art! 1 Link to post Share on other sites More sharing options...
ozzyo Posted September 16, 2011 Share Posted September 16, 2011 Hello Brian, I don't think that I would send that through the post, no matter how well packed. OzzyO. Link to post Share on other sites More sharing options...
davidw Posted September 16, 2011 Share Posted September 16, 2011 very smart - great job.... Link to post Share on other sites More sharing options...
mozzer models Posted September 16, 2011 Author Share Posted September 16, 2011 well the bridge is now in primmer 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr now what Next ?? Link to post Share on other sites More sharing options...
mozzer models Posted September 21, 2011 Author Share Posted September 21, 2011 this week i have been working on a Bill Bedford Met Jubilee brake 3rd the body & chassie are built up but i still need to fit some vac pipes saying this is a Bill Bedford kit its gone togetter very nicley 005 by Mozzer models, on Flickr Tomorrow i will fit the vac pipe then once it has been washed & dryed i will make a start painting it Link to post Share on other sites More sharing options...
mozzer models Posted September 29, 2011 Author Share Posted September 29, 2011 Well i have now finished 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development a by Mozzer models, on Flickr 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development b by Mozzer models, on Flickr 1 Link to post Share on other sites More sharing options...
mozzer models Posted October 4, 2011 Author Share Posted October 4, 2011 One of the Jobs this week is a Ian Kirk kit of a Quad set today i have made a start on the Brake 3rd 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 2 Link to post Share on other sites More sharing options...
mozzer models Posted October 11, 2011 Author Share Posted October 11, 2011 been repaint a GWR railcar but as i removed the old paint it went back to a kit so it got a rebuild as well 4mm GWR Railcar built from the ambreco kit b by Mozzer models, on Flickr 4mm GWR Railcar built from the ambreco kit a by Mozzer models, on Flickr Link to post Share on other sites More sharing options...
hayfield Posted October 11, 2011 Share Posted October 11, 2011 Mozzer The bridge is a stunning bit of modelling, especially as its in 2mm. Its as much as I can do to knock up a turnout in N gauge and I left it to the person I built it for to fill and paint it. Thanks for showing us your workI must re-do one of my flying bananas. Link to post Share on other sites More sharing options...
mozzer models Posted October 11, 2011 Author Share Posted October 11, 2011 Mozzer The bridge is a stunning bit of modelling, especially as its in 2mm. Its as much as I can do to knock up a turnout in N gauge and I left it to the person I built it for to fill and paint it. Thanks for showing us your workI must re-do one of my flying bananas. the bridge is 4mm & not 2mm Link to post Share on other sites More sharing options...
hayfield Posted October 11, 2011 Share Posted October 11, 2011 the bridge is 4mm & not 2mm Sorry my bad memory, but does not detract from a fine bit of modelling Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now