Cooped Posted April 1, 2014 Share Posted April 1, 2014 Thanks, glad you like them. I made a couple more this evening. These guys area little Big to fit properly on the rolling road soi had to use a little license. The first is a BLI Pennsylvania Railroad Q2. Quite a beast. The next in BLI again, PRR T1. Dan 3 Link to post Share on other sites More sharing options...
slipstream Posted April 4, 2014 Share Posted April 4, 2014 Class 43 HST twin sound set. http://youtu.be/bfMzdD5Q3cw 3 Link to post Share on other sites More sharing options...
ian b Posted April 9, 2014 Share Posted April 9, 2014 Quick vid featuring my original farish 37417 fitted with a Zimo MX648 and Mr Chetter's sounds, along with directional lighting. Also featured is my non-sound 03! Filmed on my work in progress layout 'Jedburgh'. Hope you like! Ian B 2 Link to post Share on other sites More sharing options...
kitefighter Posted April 10, 2014 Share Posted April 10, 2014 Bachmann English Electric Type 4 and Sulzer Type 4 shunting 2 Link to post Share on other sites More sharing options...
250BOB Posted April 12, 2014 Share Posted April 12, 2014 Bachmann English Electric Type 4 and Sulzer Type 4 shunting Lovely videos, and a nice bit of sound. I notice that both locos tended to shoot off when then started.......have you adjusted any of the CV values on the sound decoders, or are they straight from the box so to speak.?? Perhaps a higher value for CV3 would smooth the acceleration. Not being critical....just trying to help. Were both locos bought with sound already fitted, or are they special projects..?? Bob Bob. Link to post Share on other sites More sharing options...
kitefighter Posted April 15, 2014 Share Posted April 15, 2014 Lovely videos, and a nice bit of sound. I notice that both locos tended to shoot off when then started.......have you adjusted any of the CV values on the sound decoders, or are they straight from the box so to speak.?? Perhaps a higher value for CV3 would smooth the acceleration. Not being critical....just trying to help. Were both locos bought with sound already fitted, or are they special projects..?? Bob Bob. Hello Bob, Thanks for your reply. I hadn't noticed it to be honest until you mentioned it. I was trying to make sure the locomotives didn't stall during the filming so I think I may have given the control too much power to overcome this, resulting in the less than realistic jolt as if overcoming inertia. I'll be posting a few more videos with different locomotives later and I will try and start them moving at the slowest pace to see if that looks more realistic. Do please let me know if it's still apparent. Both models are factory fitted from Bachmann. Link to post Share on other sites More sharing options...
kitefighter Posted April 16, 2014 Share Posted April 16, 2014 (edited) OO gauge Bachmann Peak Class 45 N°45120 pulling eight coaches from stationary idle. And passing at speed at the same point. Edited April 16, 2014 by kitefighter 1 Link to post Share on other sites More sharing options...
faulcon1 Posted July 28, 2014 Share Posted July 28, 2014 (edited) http://youtu.be/oygg14h-sZA Here's a driver eye view from a GW auto coach. I should add this was a test to see how it worked and yes it works rather nicely. I was going to remove the thick plastic windows but decided that if I did most would think that the camera was on a flat wagon with a false auto coach mock up in front of the lens. The person racing around and shutting covers is me because it started to rain. The camera was totally protected by plastic film so it didn't get wet. Once I'd got everything pack and closed up............ the sun came out again. Edited July 30, 2014 by faulcon1 1 Link to post Share on other sites More sharing options...
RMweb Premium Steve Purves Posted August 2, 2014 RMweb Premium Share Posted August 2, 2014 As recommended by Paul, here is a couple of videos I have made of my first foray into N gauge sound. Apologies for some copying from my build thread... Having spent a bit more time with the grid and a phone call to Digitrains in Lincoln made me realise the sound set was in fact very old and a newer and more superior set was in fact available. A trip to Lincoln on friday afternoon rectified that... N gauge Dapol 56 DCC Sound: Whilst there and chatting to the ever helpful Paul my arm was twisted into new toy position and this was the result... N gauge Farish 37 DCC sound: The 37 is an interesting one. I had always believed that sound in N required major surgery... with this one all I did was unclip the cab interiors and plug the 6 pin Zimo Mx646 in. The speaker fits in the other cab space. The speaker end lifts the body by about 1mm. Some light filing will relieve that... 1 Link to post Share on other sites More sharing options...
RMweb Premium Steve Purves Posted August 3, 2014 RMweb Premium Share Posted August 3, 2014 A bit of Binary driving this morning. N gauge 37 DCC sound. HAA wagons: Really must get the 47 done! 2 Link to post Share on other sites More sharing options...
pauliebanger Posted August 3, 2014 Share Posted August 3, 2014 Here's a quick clip of an 0 gauge Ixion Manning Wardle to which I added sound, smoke, exhaust beat synchronisation, working lamp, firebox flicker and a 143,000uF stay alive capacitor for a fellow RMwebber. This is his video which I have postedto YT. Decoder is the ZIMO MX645 http://youtu.be/IyLPh1WjHc4 Kind regards, Paul Link to post Share on other sites More sharing options...
pauliebanger Posted August 3, 2014 Share Posted August 3, 2014 Just to show that I don't restrict my activities to providing sound for R-T-R models, here's a kit-built 7mm narrow gauge model for a change with a custom sound project specified by the owner. They are all short clips. http://www.youtube.com/watch?v=J3GRpJcOUYU http://www.youtube.com/watch?v=NGl29-f3fyA http://www.youtube.com/watch?v=IMDqDthKBRM http://www.youtube.com/watch?v=YAIehUOYM1s http://www.youtube.com/watch?v=ebki0grmxtw http://www.youtube.com/watch?v=Ea-gtxBHuJ8 http://www.youtube.com/watch?v=kfQHSRTp22w Kind regards, Paul Link to post Share on other sites More sharing options...
MR PJ Posted August 6, 2014 Share Posted August 6, 2014 Hello Steve, also sounds like the toddler out of view was also enjoying the thrash! I hope to get a video done over the weekend of a recent class 24 conversion, again using Paul's multi-drive. Funny enough I am currently doing a 47, its in bits in my lounge. I have removed some metal from the chassis where the fuel tanks are to fit a sugar-cube speaker, plus filed a groove down the side for the speaker wires to go. My intention is to fit cab lighting too eventually! Most difficult part of the conversion will be working out which coloured wire goes to the headcode lamps/lail lights - its not obvious on farish models. Cheers, Paul Link to post Share on other sites More sharing options...
MR PJ Posted August 11, 2014 Share Posted August 11, 2014 Farish Class 24 Please see You tube link below of a Farish 24 with MX648 decoder and Multi-drive sounds, running on a typical Kyle line set at Achnasheen. Disc headcodes, weathering and re-numbering to 24112 still to do.... http://youtu.be/9nNB60UntGA 1 Link to post Share on other sites More sharing options...
MR PJ Posted August 19, 2014 Share Posted August 19, 2014 (edited) Hello, Please see You tube link to a recent N gauge Farish 47 conversion, seen here at Achnasheen. As per other posts its an MX648 and Paul Chetter's multi-drive, seems to work very well in N gauge. http://youtu.be/gnRmq6eQm0w Edited August 19, 2014 by MR PJ 1 Link to post Share on other sites More sharing options...
pauliebanger Posted August 20, 2014 Share Posted August 20, 2014 Paul, The link isn't working for me directly. I copied the link to my browser address bar and got the video. Nice video. Can anyone get to sleep in that hotel? Paul Link to post Share on other sites More sharing options...
MR PJ Posted August 20, 2014 Share Posted August 20, 2014 Hell Paul, I managed to put in the wrong address for the link first time round, but did notice it still shows video unavailable if you click on even it after I corrected it. I am going to be putting in a new video within the next week or 2 (a pair of Dapol 26's), so I will repost this link at the same time,hopefully with better results. The link on n gauge forum does seem to work though. Sorry, you will not be able to sleep in the real hotel at Achnasheen as it burnt down in 1994! I hope to put in some lighting and some interior bar detail eventually, so if you can beam yourself down to 2mm scale you are welcome to drink in the bar.... Paul, The link isn't working for me directly. I copied the link to my browser address bar and got the video. Nice video. Can anyone get to sleep in that hotel? Paul Link to post Share on other sites More sharing options...
MR PJ Posted August 20, 2014 Share Posted August 20, 2014 A link to video of my earliest DCC conversions, a pair of Dapol 26's in stereo: Here is the link to the Farish 47 again, hope it works this time..... http://youtu.be/gnRmq6eQm0w Link to post Share on other sites More sharing options...
pauliebanger Posted September 9, 2014 Share Posted September 9, 2014 Hornby Rail Road P2 with sound. http://youtu.be/bvU88rcuDLQ Kind regards. Paul Link to post Share on other sites More sharing options...
pauliebanger Posted September 9, 2014 Share Posted September 9, 2014 Hornby Rail Road Bagnall shunter with sound and Supercap stay alive. http://youtu.be/l7W_Q6b-lwc Who would have though it? Perhaps the RR on the cab stands for Range Rover? Lol Kind regards, Paul Link to post Share on other sites More sharing options...
HLT 0109 Posted September 10, 2014 Share Posted September 10, 2014 Brilliant, Paul. Love 'em both. Harold. Link to post Share on other sites More sharing options...
faulcon1 Posted September 29, 2014 Share Posted September 29, 2014 (edited) Have you ever wanted to be a trainspotter on a OO gauge railway?, but can't because your too big. Well thanks to the latest action cameras we now can. http://youtu.be/7Nmcvez0an0 http://youtu.be/Zimo7K0hqiE Edited September 29, 2014 by faulcon1 1 Link to post Share on other sites More sharing options...
SRman Posted September 29, 2014 Author Share Posted September 29, 2014 Very effective. Would you mind posting some details of the camera you used for that, please? Link to post Share on other sites More sharing options...
faulcon1 Posted September 30, 2014 Share Posted September 30, 2014 (edited) Very effective. Would you mind posting some details of the camera you used for that, please? The camera I used for these shots (and other shots in the future) is a Sony AS100V Action Cam. It is oblong in shape with the lens at the top. One of it's many features is a function called "Flip" which means that held the right way up the footage taken is upside down. But if you invert the camera the lens is now at the bottom and the footage taken is the right way up. I had an outtake of an A4 with the camera inverted at track side level and a OO gauge A4 looks like an O gauge A4 close up. If you are thinking of buying one of these cameras be warned it's not a cheap toy and for me here in Australia it cost me $600.00. It is WiFi controlled and you wear an small LCD screen on your wrist which acts as a view finder. The camera was held in place on the platform with nothing more sophisticated than two sausages of Blu-Tak. I also used the camera in the inverted position to film from the inside of an old GWR Autocoach. This is the camera the right way up. The camera inverted inside the Autocoach. The tape on the windows is to stop light intrusion on the lens. The view from inside the Autocoach but not level. The symbols clockwise are, no memory card in the camera, fully charged battery and camera in video mode. The camera is now level thanks to the sausages of Blu-Tak. It looks a bit Heath Robinson but it does work. That LCD screen can control 5 of those AS100V cams at once. http://youtu.be/oygg14h-sZA Edited October 1, 2014 by faulcon1 1 Link to post Share on other sites More sharing options...
faulcon1 Posted October 1, 2014 Share Posted October 1, 2014 Unlike a lot of HD mini cameras which are just standard resolution this action cam has a variety of resolutions to choose from. Highest Resolution PS (Smooth image recorded at 2x frame rate) 1920x1080, Imaging and playback frame rate 60 NTSC/50 PAL. Highest Resolution HQ 1920x1080, Imaging and playback frame rate 30 NTSC/25 PAL. High Resolution STD 1280x720, Imaging and playback frame rate 30 NTSC/25 PAL. High Speed Recording HS 120 (Smooth image recorded at 4x frame rate) 1280x720, Imaging and playback frame rate 120 NTSC/100 PAL. High Speed Recording HS 240 (Smooth image recorded at 8x frame rate) 800x480, Imaging and frame rate 240 NTSC/ 200 PAL. Super Slow Recording SSLOW (Super slow motion recorded at 4x frame rate) 1280x720, Imaging frame rate 120 NTSC/100 PAL, Playback frame rate 30 NTSC/ 25 PAL. Standard Resolution VGA 640x480, Imaging and playback frame rate 30 NTSC/25 PAL. There is certainly enough choices there to keep most people happy. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now