McC

Reposting from the spec: Article number - T0-2008S The speakers are manufacturered and branded for us by Tangband for both OEM fitting at our other factories and sale as an accessory. https://www.accurascale.com/en-eu/collections/dcc-decoders-and-accessories/products/accurathrash-dcc-sound-speaker-pack-of-1

Fran is on a plane to Dortmund right now :) , but that aside, the manual shows either Cold Start or Wheel Slip on startup on F8, which is a latching toggle. The Locos with the refurbished file have the cold start, the others, the slip. Hope that helps!

I can confirm that's an accurathrash :) https://www.accurascale.com/collections/dcc-decoders-and-accessories/products/accurathrash-dcc-sound-speaker-pack-of-1

Aside from being off topic Graham, I'll defer to our actual legal team, who provided that our (legacy) reservation fees were not refundable in the event of a customer breach of contract, as provided for , and reconfirm that as we now use an automated platform, we're happy to refund any deposit or part payment advanced on any of our preorders as we, indeed, move to a no money down whatsoever model, with the launch of the J69 range, and new Class 37 batch, and as we move forward.

Legally, if it's a part payment, probably, though under UK consumer law, 'deposits' and commitments to buy are not legally refundable, which is why I made my point about you missing the point - for a period, we took reservation fees on locomotives due to the admin-heavy nature of the process, which were non refundable. Moot now, as we use a deferred payment commitment instead, which is automated and does not require the manual admin overhead,

We've clarified the 37 specification to avoid any 'style' or 'comparative' confusion. - hope that helps!

"Earth mover" are brands created by another UK company who sell DCC solutions, and bear no connection to the actual Tangband speakers in use on our models ;) The Speaker specification is Highlights The easiest way to add high-quality audio to accurascale locos Small, oval passive radiator extends response to 200 Hz Tiny 2.17" H x 0.94" W x 0.34" D self-contained design 20.1 mm polypropylene-composite inverted dome driver Specifications Article number - T0-2008S Woofer Type - Passive radiator design Power Handling (RMS)0.5 W Power Handling (max)1W Impedance (Z)4 Ohms Sensitivity73 dB (M / W) Frequency Response200Hz - 20KHz Voice Coil Diameter11.8 mm Cone / Diaphragm Material - PP composite with elastomer Surround Material - PP composite material

The magnetic lift-off roof on the 37 provides full access to the chip socket and speaker area. To fit the accurathrash simply pop off the roof, pop in the speaker connector (and chip) All models have the 'iPad' style small speaker, stay alive bank and full lighting suite as 'built in, deluxe' features out of the box. Hope that helps!

If, it was a deposit which it was not. I’ve reached out directly to the OP and i’m sure as always we can look after him however.

Not taking a small deposit is the change, which as I said, applies to 'new' runs. As these two exclusives are part of the original run 1 of our Class 66, it would be unfair to those who ordered the other batch members and paid the same £25 deposit. You can of course cancel at any time for a refund.

The Class 66's have all taken a small deposit (Just £25). We offered no money down on the new J69 and New run of Class 37s however and that will be the norm for 'new' runs.

Some customers have found a gentle filing of the ‘V’ to a soft curve in the kinematic recentering will allow for more tolerant centering after curves or points. May help!

Thanks for the feedback Danny! For any specific issues please contact the team at support@accurascale.co.uk where we’d be delighted to review in detail any concerns and address them to your complete satisfaction

Hi guys A few quick points on the sound, please let the supercapacitor charge up for a half minute or so before kicking off or if your controller voltage is a little low it can ‘look’ like a cut off or issues with the speakers. Hope that helps!

The DCC function chart in the manual is common to all the models for dcc use. We should have an ‘out of the box’ ESU lokpilot chip in stock ina few more weeks for silent function also.

That’s our default yes so just drop us a note with the order ID and we’ll split that for you

Do you have yours? Photos seldom do paint finished full justice ;)

As per the specifications none of the 37’s announced so far have working fans. Our focus has been on delivering the delayed models and producing more to meet demand before embarking on the retooling required (for the motor mounts ) and changes in prices that may be needed. These 37’s are identically highly specified as run 1, with dual speakers, extensive lighting, built in stay alive etc.

Given enough time we will, of course, accurascale everything. The only question is one of order :)

Click the support icon bottom right and you’ll find all the product guides in there now.

We take (default) all major credit and debit cards, which is the first payment option, then PayPal, then ClearPay, then Revolut (which is for both cards and direct bank payments). Unless you have a revolut account personally you are paying through? Choose one of the other payment methods.

Hi Phil, Missing on all three, hope that helps!

Hi Cherry Tree, The roof numbers are simply the last 4 digits of the running numbers - we'll add updated photos soon!

On the order confirmation page, just click Pay Now, and you can checkout normally with Pay in 3 with PayPal.