scottiedog Posted February 24, 2015 Share Posted February 24, 2015 Paul - If there is room, try tacking at the the top and bottom, remove the clamp, wait for the heat to dissipate and then carefully and quickly run a seam into the remaining gap. Catch up with you on Saturday, at Thirsk. I'm bringing a car load with me just to see you! David Link to comment Share on other sites More sharing options...
Blue Max Posted February 24, 2015 Share Posted February 24, 2015 If you check the Coffman web site you will see that they already make a clamp with the end of the aluminium angle already machined out, giving clearance in the area you would solder the internal angles of a wagon, part number AC-7-1 Combo Right Clamp refers Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted March 15, 2015 Author RMweb Gold Share Posted March 15, 2015 A little bit of borrowing from the Midland tonight, a quick ( ) conversion of the Slaters Midland goods dray/rully. North Eastern ones were 11' 6" long and the MR were 14' so 10mm has been removed from the length, it should also be a bit narrower but I don't think this will be as noticable. I've also inserted a 12BA screw so the front axle will 'steer' and so be pose-able. 14 Link to comment Share on other sites More sharing options...
RMweb Gold Popular Post Worsdell forever Posted March 19, 2015 Author RMweb Gold Popular Post Share Posted March 19, 2015 The rully has had a couple of coats of crimson lake (proper NER crimson lake Derek!), the frame black, the floor 'wood' and the 'oss brown. Not sure if the shafts would be painted or not. While I was looking through photos of E1/J72s I noticed that many of them had oil cans sat on the boiler handrails, I found a couple in a Springside loco tools set. I think they should probably be white but some NER oil cans that I have are painted green so I have done these the same. 20 Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted March 26, 2015 Author RMweb Gold Share Posted March 26, 2015 Something ultra modern tonight! Ex LNER brakevan (new TMC Limited edition) converted to EM, horrible couplings in the bin and a bit of weathering. Conversion to EM was the easiest yet, just changed the wheels, didn't have to alter the brake shoes or shave anything off the axlegaurds. 7 Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted March 30, 2015 Author RMweb Gold Share Posted March 30, 2015 Back to the Rully, I've had some transfers made up by John Peck, they're a little too large but I think they look ok. The other side is still to do and there's still other painting to finish off. 18 Link to comment Share on other sites More sharing options...
RMweb Premium wagonbasher Posted March 30, 2015 RMweb Premium Share Posted March 30, 2015 I do like your cart. Think I have a spot for one of those on Tackeroo.... I see TMC have some in stock... Are you travelling to York? we could arrange an exchange andy Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 19, 2015 Author RMweb Gold Share Posted April 19, 2015 More North Eastern stuff, this time a 'Motor & Carriage Truck', Diagram 167. I bought it a couple of years ago, built by the late Malcolm Crawley from a Chivers kit. The roof isn't fitted, it needs glazing first and it needs spoked wheels. 17 Link to comment Share on other sites More sharing options...
davefrk Posted April 20, 2015 Share Posted April 20, 2015 I thought you would've built your new NER cast iron bufferstop by now, you've had it at least 48 hours..... Dave. Link to comment Share on other sites More sharing options...
Mrkirtley800 Posted April 20, 2015 Share Posted April 20, 2015 I like the NER covered carriage truck, Paul. Would have looked good on Canal Road, or even better on Kirkby Malham. The flat bed delivery truck looks complete with the transfers. Very effective. For my Midland ones, I printed out white on blue on the 'puter on thin paper then stuck them on. The ink colour and the blue paint match up pretty well. Derek 9 Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 20, 2015 Author RMweb Gold Share Posted April 20, 2015 Thanks Derek. I thought you would've built your new NER cast iron bufferstop by now, you've had it at least 48 hours..... Dave. In the next week or so... Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 21, 2015 Author RMweb Gold Share Posted April 21, 2015 I bought a sheet of HMRS LMS pre-group wagon transfers on Saturday and after I finished the NER CCT I lettered a couple of wagons that have been waiting a while. a Midland open and L&Y long one plank. They still need a few little bits of lettering adding. 15 Link to comment Share on other sites More sharing options...
Horsetan Posted April 22, 2015 Share Posted April 22, 2015 I thought you would've built your new NER cast iron bufferstop by now, you've had it at least 48 hours...... I can see them making a film about this sort of thing. They could call it "Another 48 Hours"....oh wait....hang on... Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 22, 2015 Author RMweb Gold Share Posted April 22, 2015 I can see them making a film about this sort of thing. They could call it "Another 48 Hours"....oh wait....hang on... Well, they're put together and part painted now... 1 Link to comment Share on other sites More sharing options...
ozzyo Posted April 23, 2015 Share Posted April 23, 2015 Well, they're put together and part painted now... That's no good we need photos, not just the written word. Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 23, 2015 Author RMweb Gold Share Posted April 23, 2015 That's no good we need photos, not just the written word. See Greyscroft Mine. Link to comment Share on other sites More sharing options...
mikemeg Posted April 23, 2015 Share Posted April 23, 2015 Back to the Rully, I've had some transfers made up by John Peck, they're a little too large but I think they look ok. The other side is still to do and there's still other painting to finish off. IMGP0425-002.JPG Is that a Worsdell horse or a Fletcher horse? If it were the later Raven horse, then it would have been superheated - perish the thought - and might have had a snifting valve fitted; this for snifting. Lovely model though and a very unusual subject. Cheers Mike Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted April 23, 2015 Author RMweb Gold Share Posted April 23, 2015 Is that a Worsdell horse or a Fletcher horse? If it were the later Raven horse, then it would have been superheated - perish the thought - and might have had a snifting valve fitted; this for snifting. Lovely model though and a very unusual subject. Cheers Mike A TW Worsdell horse, rebuilt to simple expansion... Link to comment Share on other sites More sharing options...
mikemeg Posted April 23, 2015 Share Posted April 23, 2015 (edited) A TW Worsdell horse, rebuilt to simple expansion... Ah, thank God for that. It was the ones with compound expansion, larger diameter pissedons and double blast pipes, which were the real rogues - exhausting all over the place. Lacking any real haulage power (they were rated as 1H's) with very limited route availability; poor at low speeds, even poorer at high speeds, they were rapidly relegated to the more menial equine tasks, though one of them, reportedly, did win a minor selling plate at Blaydon!! They were very rapidly withdrawn and most sent to Darlington - some sent to France, for what purpose I know not - to become glue!!!!! I'll get me coat!! Very best regards Mike Edited April 23, 2015 by mikemeg 1 Link to comment Share on other sites More sharing options...
Class O Posted April 25, 2015 Share Posted April 25, 2015 The NER, LNER and BR oil pots I have seen/had were all galvanised...:0) Link to comment Share on other sites More sharing options...
Class O Posted April 25, 2015 Share Posted April 25, 2015 A few photos I've taken over the last few years of the preserved 63395 at Grosmont, 63340 has the same simple variations as the preserved example, the same boiler (dome position) and tender with all round coal rails. 63340 of course won't have vac pipes or vacuum ejector. DSCF1065.JPG DSCF0726.JPG DSCF0741.JPG Q6-a.JPG A few photos I've taken over the last few years of the preserved 63395 at Grosmont, 63340 has the same simple variations as the preserved example, the same boiler (dome position) and tender with all round coal rails. 63340 of course won't have vac pipes or vacuum ejector. DSCF1065.JPG The preserved loco has an ex atlantic 4,125 gallon tender, when we were rubbing it down before painting we found lots of green paint. The green booki is wrong when it states it has a 3,940 gallon tender. Several Q6s got tenders from withdrawn atlantics..... DSCF0726.JPG DSCF0741.JPG Q6-a.JPG Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted May 7, 2015 Author RMweb Gold Share Posted May 7, 2015 Came home tonight to find an envelope from Narrow Planet containing some rather nice NER numberplates, No 1749s plates have now been painted (well, black permanent marker actually) cleaned up and fitted. 18 Link to comment Share on other sites More sharing options...
RMweb Gold Mikkel Posted May 13, 2015 RMweb Gold Share Posted May 13, 2015 That looks fantastic. Just been having a read through your recent builds on here, lots of useful ideas and info, thanks Paul! Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted May 17, 2015 Author RMweb Gold Share Posted May 17, 2015 1749 had a run out to Leighton Buzzard yesterday, thanks Tony! 12 Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted June 5, 2015 Author RMweb Gold Share Posted June 5, 2015 After a couple of weeks with no modelling, holiday then full of cold! the next project is one of Arthur Kimber's J24s, It's going together well but some of the part numbering is a bit off. I'm building it compensated using High Level hornblocks, the springs have been cut off their spacers which were shortened and the springs soldered back on so they will fit between the EM frames, the kit seems to be designed only to be compensated in P4. The cab was actually built last year but the footplate was only started on Monday night, it has gone together well, I thought there might have been a bit of distortion soldering the laminations together but all seems to be well. The last job last night was the front sandbox/splashers then the whole lot was cleaned up. The cab isn't attached yet. 12 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now