HSB Posted December 22, 2015 Share Posted December 22, 2015 Since when have you worried about upsetting apple carts, Brian? Link to comment Share on other sites More sharing options...
islandbridgejct Posted December 23, 2015 Share Posted December 23, 2015 Um, given that P87 runs on 16.5mm gauge while P4 runs on approximately 18.82mm*, does it matter? (* 21mm in my case - though runs is probably stretching things.) Link to comment Share on other sites More sharing options...
Horsetan Posted December 23, 2015 Share Posted December 23, 2015 .....(* 21mm in my case - though runs is probably stretching things.) 21 is fun! Link to comment Share on other sites More sharing options...
RMweb Premium DIW Posted December 23, 2015 RMweb Premium Share Posted December 23, 2015 .... Would it upset the apple cart too much ....Is there a cart to be upset in the first place? There could possibly be an upset apple cart in the canal - result of collision with the car already in there? (For those wondering what car that would be, see photos at the end of page 16 of this thread). Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 7, 2016 Author Share Posted January 7, 2016 There could possibly be an upset apple cart in the canal - result of collision with the car already in there? (For those wondering what car that would be, see photos at the end of page 16 of this thread). I actually have a Wiking T87 (what else in 87 land) but it's far too good to dump in the canal. Link to comment Share on other sites More sharing options...
unklian Posted January 13, 2016 Share Posted January 13, 2016 Hello Brian and Co, here is another interesting mixed gauge track arrangement for you . 5 Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 16, 2016 Author Share Posted January 16, 2016 Hello Brian and Co, here is another interesting mixed gauge track arrangement for you . Thank you for that Ian, there seems to be more variations of mixed gauge trackwork than you could shake a stick at. I don't know where I could fit that one in or this gem I came across recently. B 2 Link to comment Share on other sites More sharing options...
RMweb Premium Neil Posted January 16, 2016 RMweb Premium Share Posted January 16, 2016 That's, well, groovy. Would I be right in assuming it's a tramway on the continent? Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 18, 2016 Author Share Posted January 18, 2016 (edited) That's, well, groovy. Would I be right in assuming it's a tramway on the continent? Yes that's right Neil. One of several crossings of this type I found in Prague - they must have got a job lot of them. Fascinating stuff. B Ps, see how the wheels run on the edge of their flanges through the crossing rather than on their tyres. Edited January 18, 2016 by Brian Harrap Link to comment Share on other sites More sharing options...
RMweb Premium DIW Posted January 19, 2016 RMweb Premium Share Posted January 19, 2016 Ps, see how the wheels run on the edge of their flanges through the crossing rather than on their tyres. Clearly the inspiration for Marklin HO flanges! (Other HO manufacturers with similar wheel profiles are available). So, surely anathema to a P87 practiioner such as yourself? Link to comment Share on other sites More sharing options...
stadman Posted January 19, 2016 Share Posted January 19, 2016 Yes that's right Neil. One of several crossings of this type I found in Prague - they must have got a job lot of them. Fascinating stuff. B Ps, see how the wheels run on the edge of their flanges through the crossing rather than on their tyres. Didn't that happen on some UK systems? Glasgow springs to mind to convey standard gauge mainline wagons over the system. Link to comment Share on other sites More sharing options...
HSB Posted January 19, 2016 Share Posted January 19, 2016 Trams ran on their flanges through some pointwork in Leeds. Where railway wagons were run on their (deeper) flanges a slightly narrower gauge was used - 4' 73/4" if I remember correctly - to compensate. Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 20, 2016 Author Share Posted January 20, 2016 Yes indeed, many, most? street tramways do this - run on the flange through crossings - for quieter/smoother running? I have often wondered why the big (heavy rail) railways don't do it. (Its a very mute point but, in theory at any rate, the outer edge of the flange adjacent to the point of contact of the tread with the railhead is actually going the opposite way to the direction of the vehicle. Discuss). Link to comment Share on other sites More sharing options...
RMweb Gold Stubby47 Posted January 20, 2016 RMweb Gold Share Posted January 20, 2016 I would imagine that as tramways have sharper curves, a fixed axle wheelset will have slippage on the outer wheel, so running on flanges is only another type of excess force. But, as the loads on the wheels will be considerably lighter than those for railway wheels, they would be engineered to cope with all these sorts of forces, meaning stronger flanges, for example. Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 23, 2016 Author Share Posted January 23, 2016 The last batch of OHL masts are all lined up (not very neatly) ready for airbrushing prior to installing on the soon to be opened electric service to the lower end of the wagon hoist on QUAI:87. Extra filigree work has been added since the first masts were made some time ago - once I start filigreeing I find it hard to stop. The flags, or laundry hanging out, is masking tape to keep paint off the crossarms which will later have to have the contact wire soldered to them - also off the glass bead insulators, which don't really insulate anything in model form of course but look pretty. It took some time and effort working out the locations for these masts which have to accommodate the sharp curves and the support columns of the high level line. I find it quite rewarding plotting the location of the OHL wire, keeping it straight between masts and over the swept course of the (offset in this case) pantograph, whilst not having too many extra pulloffs. Brian. 14 Link to comment Share on other sites More sharing options...
alastairq Posted January 23, 2016 Share Posted January 23, 2016 How are the poles to be secured in the baseboard? Will they have to withstand the pressure of pulled pork wire? A nice touch might be, some neatly turned, but pointy, brass finials to top them off? [And provide pain should elbows and hands get too close to plucking top C on the wire?] All not outside Le Baron's undoubted abilities I'm sure? Link to comment Share on other sites More sharing options...
sir douglas Posted January 23, 2016 Share Posted January 23, 2016 is it just me thats missing what "filigreeing"means Link to comment Share on other sites More sharing options...
HSB Posted January 23, 2016 Share Posted January 23, 2016 Probably Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 24, 2016 Author Share Posted January 24, 2016 is it just me thats missing what "filigreeing"means Its the twiddly bits. B Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 24, 2016 Author Share Posted January 24, 2016 How are the poles to be secured in the baseboard? Will they have to withstand the pressure of pulled pork wire? A nice touch might be, some neatly turned, but pointy, brass finials to top them off? [And provide pain should elbows and hands get too close to plucking top C on the wire?] All not outside Le Baron's undoubted abilities I'm sure? Hello Alastair.Thank you for your interest. The masts will be fitted into a larger sized bit of (square) tubing that is firmly epoxied into the baseboard. See pic. All the OHL masts on QUAI:87 (tramway included) have to be easily removable together with the wire for transporting the darned thing to shows etc and have to be re-erected on site, quite a palava which is one reason the layout doesn't go out very often. I use piano wire for the line work which is fairly self supporting (unlike phosphor bronze wire) so does not create too much tension and what there is is restrained but the square telescopic mast construction. The tramway along the quayside has round section masts (which pull out of their bases, see above) and as it is a fairly straight run along the road is OK. Finials, that's a good idea, just make sure they're not to pointy Baron. 16 Link to comment Share on other sites More sharing options...
alastairq Posted January 24, 2016 Share Posted January 24, 2016 Thank you for that, Brian....for a moment I thought maybe the pole bases would be threaded, then lock nutted through the baseboard.....or other such extremely engineered means? Rather a neater solution is yours..[don't you just lurve starwars-speak? ] Especially when I look at my own poles,made of wire coat hangers & solder!! Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 25, 2016 Author Share Posted January 25, 2016 Especially when I look at my own poles,made of wire coat hangers & solder!! Don't forget Alastair its not so much what something is made of or quite how they appear - its more a case of having fun doing it and the sense of achievement. B 3 Link to comment Share on other sites More sharing options...
islandbridgejct Posted January 30, 2016 Share Posted January 30, 2016 This thread was referenced in Tony Wright's thread. You may have seen it, but it immediately made me think of the trackwork on Quai 87: http://members.trainweb.com/bedt/indloco/crrnjbxt.html Food for thought, perhaps. There's also a link in his thread to a video of a model of it. The trackwork is fantastic. https://www.youtube.com/watch?v=pErgphjRECo I'm probably very late to the party on this, and I imagine it's been discussed before. If not, well, it blew my socks off. Alan Link to comment Share on other sites More sharing options...
Brian Harrap Posted January 31, 2016 Author Share Posted January 31, 2016 I'm not sure the OHL on QUAI:87 could be considered P87 either but anyway here goes with an update on the installation of the masts and wirework threading its way between the columns of the upper level to reach the lower level of the wagon hoist. Simple tramway type of course but I have managed to fit it in so far without having to dismantle the bridges above, well thats how they would do it in 1:1 wouldn't they. I have just noticed in the pic that the wire sags just a bit too much towards the right hand end - have to get the retensioning gang onto that. Brian 13 Link to comment Share on other sites More sharing options...
RMweb Gold Re6/6 Posted February 1, 2016 RMweb Gold Share Posted February 1, 2016 The 'cruel' lens can have it's uses! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now