Jump to content
Users will currently see a stripped down version of the site until an advertising issue is fixed. If you are seeing any suspect adverts please go to the bottom of the page and click on Themes and select IPS Default. ×
 

Accurascale Class 55 Deltic - 4mm scale


Recommended Posts

My D9009 turned up today. Very pleased with it. Not something I was looking forward to as much as some of you given it's a bit more of an impulse purchase, but it is a really good model that gets me even more excited for the 37 and 92 (which are more my era of interest)

 

One chain off, which was a bit of a nightmare reattaching as the chain detached from the bracket thingy too and I lost paint off it putting it back. It will be OK though but it will be interesting to see how these get on with age.

 

One question I haven't seen asked though. Has anyone successfully driven one using the Lokprogrammer cab? Mine programs fine but shorts the Lokprogrammer when I click GO. My Z21 drives it fine and it doesn't short so I think it's possibly something to do with the stay alive and the Lokprogrammer's sensitivity.

 

Edit, now it has had some running in on the main layout the Lokprogrammer does drive it so 🤷‍♀️

Edited by TomScrut
Link to post
Share on other sites

After a long wait my Alycidon D9009 arrived today! 
Arrived home from work, opened it faster than a kid at Christmas…

But unfortunately looks like it’ll be going back 😭

The body sides and roof look great but the nose ends have paint chips on the headlight, some marks in the yellow and a couple of detail bits either loose or fallen off (Which I’d be happy to put back on myself if I had to)
Such a shame but I have no doubt Accurascale / Locomotion will put it right! Will fire off an email in the morning, hopefully they have some spare body shells 🤞 

A632A0A9-231D-41C3-AC35-A426AED048CC.jpeg

04D03277-D7D8-48B8-B562-525F3E08219E.jpeg

C58EC205-40D2-482A-BD26-1B56487F4345.jpeg

  • Like 1
  • Friendly/supportive 4
Link to post
Share on other sites

41 minutes ago, Northmoor MPD said:

After a long wait my Alycidon D9009 arrived today! 
Arrived home from work, opened it faster than a kid at Christmas…

But unfortunately looks like it’ll be going back 😭

The body sides and roof look great but the nose ends have paint chips on the headlight, some marks in the yellow and a couple of detail bits either loose or fallen off (Which I’d be happy to put back on myself if I had to)
Such a shame but I have no doubt Accurascale / Locomotion will put it right! Will fire off an email in the morning, hopefully they have some spare body shells 🤞 

A632A0A9-231D-41C3-AC35-A426AED048CC.jpeg

04D03277-D7D8-48B8-B562-525F3E08219E.jpeg

C58EC205-40D2-482A-BD26-1B56487F4345.jpeg

 

Oh no! I'm really sorry to see the images - thats not great.

 

I've received one of the Locomotion D9002 models and mine has similar issues - one chain detached, both the mounting points on the body on that side are yellow and have lost all the black paint, two sets of under buffer steps missing (not in the box when carefully opened on a tray) and paint flaking off the cup like pieces on the front end in of the tail lights (not sure what these are), but the yellow paint is flaky and has come off one of them completely leaving just the yellow plastic part. I've also got a chip on the high intesity headlight casing in the yellow.

 

I know that individually they are not massive issues, but its dissapointing with the high expectations that have been set that there are a few of them when the rest of the loco seems so well put together. 

 

I've fed back to Locomotion and they are sorting it for me which is great service from them (Stuart).

Edited by adamvb
  • Like 1
  • Friendly/supportive 1
Link to post
Share on other sites

45 minutes ago, Northmoor MPD said:

After a long wait my Alycidon D9009 arrived today! 
Arrived home from work, opened it faster than a kid at Christmas…

But unfortunately looks like it’ll be going back 😭

The body sides and roof look great but the nose ends have paint chips on the headlight, some marks in the yellow and a couple of detail bits either loose or fallen off (Which I’d be happy to put back on myself if I had to)
Such a shame but I have no doubt Accurascale / Locomotion will put it right! Will fire off an email in the morning, hopefully they have some spare body shells 🤞 

A632A0A9-231D-41C3-AC35-A426AED048CC.jpeg

04D03277-D7D8-48B8-B562-525F3E08219E.jpeg

C58EC205-40D2-482A-BD26-1B56487F4345.jpeg


Someone in Santa’s Workshop will be getting slapped wrists for that one…. 

  • Funny 1
Link to post
Share on other sites

  • RMweb Gold
2 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

Its only a flesh wound...

 

  • Funny 5
Link to post
Share on other sites

  • RMweb Premium
4 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

 

Is that's what is referred to as an earth fault?

  • Round of applause 2
  • Funny 15
Link to post
Share on other sites

  • RMweb Gold
4 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

Disappointing to see they resorted to the early 2000s approach of just spraying **** over it for the weathered edition ;)

  • Funny 14
Link to post
Share on other sites

  • RMweb Gold
1 minute ago, The Fatadder said:

Disappointing to see they resorted to the early 2000s approach of just spraying **** over it for the weathered edition ;)

Its more realistic than some......and more ecologically friendly

  • Funny 2
Link to post
Share on other sites

  • RMweb Premium
7 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

I put a laugh emoji because it is soooo funny……but sorry for your loss 😱

  • Agree 1
  • Funny 1
Link to post
Share on other sites

  • RMweb Premium
15 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

So did it win the rally it was in.............

  • Round of applause 1
  • Funny 3
Link to post
Share on other sites

  • RMweb Gold
17 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg


think you’d be better off with a Lima one …. Or is Fran paying you to test to destruction 😜
 

  • Funny 4
Link to post
Share on other sites

  • RMweb Gold

I keep toying with the idea of a Crepello. I have a green pre-tops and a blue post-tops so it would be the middle as it were.

 

So can people please buy them all before I go another step closer to bankruptcy 🤣

  • Like 2
  • Funny 3
  • Friendly/supportive 1
Link to post
Share on other sites

42 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

At least the Bachmann models are still getting use  😜

Link to post
Share on other sites

42 minutes ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

That’s a Bachmann model. Not a’scale. But good weathering  

 

Link to post
Share on other sites

  • RMweb Gold
1 hour ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

 

Well if you will double head behind a racehorse...

  • Funny 4
Link to post
Share on other sites

  • RMweb Gold
53 minutes ago, ERIC ALLTORQUE said:

Just noticed Crepello is looking last to sell out,

 

Looking from the outside as a dedicated steam modeller can anyone tell the uninitiated why this model is the last on the shelf please. 

Link to post
Share on other sites

1 hour ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment

 

Inspired by D350?

 

https://flic.kr/p/LNdo76

 

You just need a USAF Super Sabre and some tomato's now.

 

https://www.thenorthernecho.co.uk/history/18236821.derailed-tomato-train-rescue-newton-aycliffe-disturbed-us-fighter-jet-plunged-field-nearby/

 

 

  • Like 1
Link to post
Share on other sites

  • Moderators
1 hour ago, Wolf27 said:

I was running my green D9002 model today when I had a minor derailment and appear to have lost one of the bogie chains. I have looked everywhere for it but to no avail.EC01B51E-EBD9-4DBB-8FCF-7547334B20F0.thumb.jpeg.ce414185708fbd0e49b492e90eca0c09.jpeg

 

Surprised it didn't receive a full burial.

  • Round of applause 1
  • Funny 5
Link to post
Share on other sites

  • RMweb Premium
46 minutes ago, Tiddles47 said:

That’s a Bachmann model. Not a’scale. But good weathering  

 

Hmm I had my suspicions as well…….cannot read “Deltic” through the windows 😆

Edited by boxbrownie
  • Funny 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...